Documents BIOS essay

Will a strict arroba grow in one broth but not another? Experiment II: Controlling Microbial Growth In part II of this week’s experiment, you will explore the resources within the Overvaluations software and investigate how the components of different media can control bacterial growth. Deliverables: Each week, you will prepare a lab report detailing your experiments for the week. Include all data, observations, and conclusions in the single report.

You should be sure to address the questions in the lab steps in the appropriate sections of the lab report.Your lab report will have the following format: Title Introduction: The first section of your lab report will be the introduction. In this paragraph or paragraphs, you are to provide information to the readers so that they can understand the purpose of the experiment Purpose – a concise statement about the lab’s objective. Background – a brief summary of the topic you are investigating. Include any information that would be necessary to understand the stated purpose. Findings – state the major results of the lab exercise. Procedure: This is the second section in your lab report.This section includes information that the reader would need in order to repeat your page I experimental procedure.

Sometimes it is hard to do all the work on your own
Let us help you get a good grade on your paper. Get expert help in mere 10 minutes with:
  • Thesis Statement
  • Structure and Outline
  • Voice and Grammar
  • Conclusion
Get essay help
No paying upfront

Do not include any observations or results in this section. Some questions that you should ask yourself to complete this section include: What chemicals did you use? What equipment? How much of each chemical did you use? How long did you perform a step within the procedure? Observations and Results: This is the third section of your report. In this section, you will communicate what you observed during the experiment. The Results section is typically dominated by calculations, tables, and figures.In your tables, label the axes of any graphs.

Discussion: This is the fourth section of your report. In this section, you will explain, analyze, and interpret your observations and results. Additionally, you will draw conclusions based on your existing knowledge. This is also where you demonstrate your understanding of the experiment by construing the significance or meaning of the results. Each week, the lab instructions will detail specific questions that should be addressed in the lab report. Use this section as your guide, NOT the questions listed in the EVIL Basic Training Manual.

Conclusion: This is the last section of your report and is separate from the Discussion section. Within a few sentences, provide a concluding statement about the results of your laboratory. In a scientific publication, this section memorizes the significant aspects and results, and identifies implications for future study. Grading Category Introduction – Completeness of background proceed re Observations & Results – Were the results accurate? Discussion Conclusion Writing Quality – Correct grammar, spelling, originality, completeness, etc.Total Points 5 30 lab Steps Step 1: Access the Overexploitation Lab Software Access the Overvaluations Software, VICTIM 2012, through the lab link at the top page of this course. See Course Specific ARQ reorient in Syllabus under Course Home for more information about this program. Page 2 Step 2: Conduct Experiments part 1 – Bacterial Growth You will conduct јo different exercises for this week’s experiment.

Note: all tests will be performed on the SAME unknown organism. You will only have one case study for this experiment. Conduct Bacterial Growth Test: 1 . Click the New Unknown button.A window will open asking you to enter a label and select a subgroup.

2. Type Growths in the “Enter a Label” line. 3. From the Subgroup drown menu, select Growth. 4. Click Auto-inoculation allowed and then click K. 5. Record details of your case study scenario.

6. The Gram Stain window will open. Record results of Gram stain. 7. Include the results in your Lab Report.

Conduct “OF Glucose Test”: 1 . Open the Biochemical Tests Reference Book. (You can find this resource in two way; you can click on the T? Button or select the Reference Books from the Help drown menu. ) 2.Open the OF Glucose Test. Review the steps of the test and determination of test results before you begin your experiment 3. From the Media drown menu, select OF Glucose Broth. The Media drown menu is to the far right of the New unknown button.

4. Enter Focuses in the Medium Label window to label your sample. Click K. Two tubes will appear. You will use the sample on the left to inoculate the sample on the right. 5. Turn on Bunsen burner by right clicking on the Bunsen burner and hitting on.

You will see the flame of the Bunsen burner. 6. Select Wire from the Tool drown menu.Flame the wire in the flame of the Bunsen burner until it glows red. 7. Bring wire over to Innocuous sample. Right click on sample and select Inoculate. Page 3 8.

Check the Traffic Signals in the upper right hand corner of the lab. Check to see that you have successfully inoculated your sample and that no contamination was introduced. 9. Turn off Bunsen burner. 10. Select Pointer tool from Tool menu. 11. Put cursor, with your Pointer tool, over your inoculated sample, drag it, and place it in the 37 degree incubator.

You will also see that your innocuous sample will “disappear” from the workbench. 2. Click the New Day button. Notice that the Virtual Days counter now reads 2. 13. Put cursor over the incubator. Right click and select your sample. Your sample tube will appear on your workspace.

14. Right click on tube and select Record Results. Review the OF Glucose Test Biochemical Test information to determine if the results of the test are costive or negative. IS. When you record the results of the test, your samples will automatically be moved to the backboard disposal bag. 16. Note the results of this test.

In addition, the results from the test are recorded in the Lab Report.Conduct OF Glucose Test with Oil: 1. For this test, you will follow the same steps as the previous test.

The only difference is that you will select the OF Glucose with Oil as your medium. 2. Label your medium as follows, Focuses Oil. 3. Two tubes are now on your workbench.

4. Following the same steps as above, inoculate your medium. Click Next Day. Note that the Virtual Day counter is now 3. Retrieve your sample from the incubator and record your results. Conduct Indolent Production Test: 1 . Open the Indolent Production Test from the Biochemical Tests Reference Book.Review the steps of this test, including that you will add Kava’s reagent after incubating the inoculated culture for one day.

Make note of how you will determine the results of this test. 2. Select Trenton Broth as your medium. Label the medium : Interpersonal. Click K. 3.

Inoculate your medium. Place in 37 degree incubator. Click Next Day. Page 4 4. Retrieve the sample from the incubator. To add Saves reagent, select the dropper tool. Note that you can now select a Reagent (this field is now active). Select Kvass Reagent.

5. Right click on your culture. Remove caps. 6.Place dropper above the tube opening and click your mouse. A window will open that says, Reagent Kvass successfully added. Click K. Note any changes in the appearance of your sample.

7. Observe and record the results. Conduct Malone Utilization Test: 1 .

Open the Malone Utilization Test from the Biochemical Tests Reference Book. Review the steps of this test. 2.

Select Malone Broth as your medium. 3. Label sample like this: Maltreatment. Click K. 4.

Inoculate your sample and incubate for 1 day. 5. Retrieve sample from incubator. Observe and record the results. View Lab Report Results: 1 .Select “Lab Report” from the View item on the top menu bar. 2.

You can copy and paste the contents of this lab report to a Word document and save. 3. Note that the lab report records the results of each of the five tests that you conducted on your sample. The lab report identifies the number of bacteria that were eliminated after each test. You will want to include this information in your lab report. 4.

Also note that you do not know the identity of the bacterium that caused the infection. 5. After you have recorded the information on the lab report, close the document. Determine Identity of Bacterium: 1 .Open the Identification Matrix from the View Command. You will find that only possible bacteria that remain after conducting this series of tests will be shown on the Identification Matrix.

Make note of the possible bacteria that might cause this infection. 2. From the Unknown command, select Identify. From the drop down menu, select a bacterium that is likely the cause of the agent (based upon the page 5 information you have from your tests and by viewing the Identification Matrix). 3. Click K. Then, click Yes, when the Confirm Identification Window opens. A window will open letting you know if you chose the correct bacterium.

. Now, open up the Lab report. Under the Identification Information of the lab report, you will see the bacterium that you selected and the bacterium that was assigned. You will also want to record this information in your final lab report. Part II – Controlling Microbial Growth 1. Click on New Unknown button.

2. Type Growths in the label field. Select. Controlling Growth from the bugaboo drown menu. 3. Click Auto-inoculation allowed. Click K. 4.

Record details of your case study scenario. 5. Record gram stain results of the organism. 6. No further tests will be performed.You will answer questions about this topic in your final lab report. See below. Step 3: Write the Lab Report use the reference areas within the Virtually known Software to answer the questions in the Write lab report section regarding controlling microbial growth.

Submit one lab report for both experiments this week. Include the following information for each part: Experiment I: Growth Media and Patterns f Growth and Experiment II: Controlling Microbial Growth Experiment l: Growth Media and Patterns of Growth 1. In the Introduction section, include the information about your case study.

2.In the Observations and Results section, include the following: Gram stain results Describe how the results of the OF Glucose Broth test. How many bacteria were eliminated as causes of the patient’s infection by using this test? Describe results from the Indolent Utilization test. How many bacteria were eliminated as causes of the patient’s infection by using this test? Describe results from Malone utilization test.

How many bacteria were eliminated as causes of the patients infection by using this test? Page 6 3. Include the answers to the following questions in the Discussion section and the Conclusion section, as appropriate.Based upon your results, is your bacteria sample a strict arroba, strict anaerobe, facultative anaerobe, or micrometeorite? Why? How important is it to add the Kvass Reagent in the Indolent Utilization test? What is responsible for the color change observed in a positive test? Did the bacteria grow in the Trenton or Malone media? Why or why not? Refer to the resources within the Overvaluations software to get details on ACH media and biochemical test. For the media used in this portion of the experiment, are the media complex or synthetic? Are the media selective, differential, both, or neither?Identify the carbon and nitrogen source for each medium. How many possible bacteria Were remaining after conducting these biochemical tests? Which bacteria remained after conducting the four biochemical tests.

Using the information in the Identification matrix, what additional tests might help you to identify the bacteria in your case study? NOTE: If you need to refer to the lab report, or the identification matrix for his lab exercise, you can to the upper right hand corner of the lab environment and select Growths from the “Unknown” drop down menu. . In the Observations and Results section, include the following: Salt is one of the oldest food preservatives. How does salt control microbial growth and reduce spoilage? Which two media include elevated concentrations of NCAA? Would bacteria that have the ability to grow in these two media be more likely to cause food spoilage? Why or why not? Bile salts are natural products of the digestive system that prevent growth of many bacteria.

How do bile salts exert antimicrobial activity? What is the concentration of bile salts in bile esculents agar?

Leave a Reply

Your email address will not be published. Required fields are marked *


I'm Gerard!

Would you like to get a custom essay? How about receiving a customized one?

Check it out